Woods Bagot’s Tribeca Rogue comes at the corner from a new angle

Set on a prominent corner of Church and West Broadway in Manhattan’s Tribeca neighborhood, 108 Chambers Street is a contemporary reinterpretation of the industrial setting and local architecture it is surrounded by. Unlike other gridded neighborhoods in NYC, Tribeca’s streets are not perfect right angles and speak to an older era of wrought-iron facades and

A slatted scrim system from MBH Architects breathes life into a historic San Francisco district

MBH worked closely with the city to balance the modern detailing of the facade with elements consistent with the historic Kearny/Market/Mason/Sutter conservation district. “Union Square is in many ways a representation of San Francisco itself, with its large and small, tall and short, colorful and quaint buildings, all standing shoulder to shoulder in incredible harmony,”

The Architect’s Newspaper presents TimberCon

Mass timber construction is on the rise from the Pacific Northwest to the Deep South, promising new potentialities in tactile design and engineering; all while offering aesthetically pleasing solutions to sustainability goals. TimberCon 2021, hosted in partnership with the Mass Timber Institute will foreground exemplary timber projects across North America; identify best-case practices for their

COOKFOX’s 25 Park Row joins Lower Manhattan with fluted concrete and dramatic massing

COOKFOX Architects has been busy lately. The New York-based architecture firm has completed or is just wrapping up scores of projects across the city, ranging from twin-towered Ten Grand and One South in Williamsburg to St. John’s Terminal in Tribeca. Central to these projects is a fine-tuned understanding of context and unpretentious design cues that embed the structures within their setting.

Architects and manufacturers discuss glazing and new code requirements

Over the past year and a half, several states, including New York, Massachusetts, and Illinois, have adopted the measures of the 2018 International Energy Conservation Code (IECC) for buildings in certain sectors. AN asked leading manufacturers and architects to describe what insulating and solar- factor performance benchmarks the code requires of glass in building facades. Below, they identify how

AEC leaders discuss how they are pivoting through COVID-19 realities

The Architect’s Newspaper asked leaders in the AEC industry to discuss how COVID-19 has disrupted projects and the processes the industry was forced to alter or halt in response to state mandates. Below, they describe what course correction looked like and how new practices might be retained in the post-pandemic future. Shawn Basler Nicholas Leahy Andrew

Q&A: Robert Heintges on taking risks and the value of a curtain wall

Robert Heintges is an influential architect and teacher who has advanced envelope design through his eponymous practice, Heintges & Associates, and through his teaching at Columbia GSAPP and Rice Architecture. This interview is part of my effort to document how different forms of specialized design expertise inform multiple architecture practices at once, and produce unstable forms of architectural authorship.

Facade engineers discuss the trend of custom repetitive manufacturing

Computer-aided manufacturing has revolutionized the field of facade production over the last decade. Dana K. Gulling, author of Manufacturing Architecture, describes the overall trend as one of “custom repetitive manufacturing,” which reestablishes a level of customizability in industrial processes and facilitates fruitful collaboration between architects, facade engineers, and manufacturers from the design-assist phase to completion. To

Facades+ will spotlight architectural trends in Fort Lauderdale

Located on the rim of the Gulf of Mexico at the southernmost extremity of the United States, Fort Lauderdale, Florida, and the rapidly expanding Miami metropolitan region, is experiencing a tremendous moment in high-quality design and re-urbanization. Neighborhoods such as the Miami Design District and Wynwood are fundamentally questioning the architectural status quo in the state, and proving a fertile ground

LEVER Architecture’s Thomas Robinson discusses architecture and engineering in Oregon

The Pacific Northwest is home to a thriving architecture and design community that is shaping the industry across the country. The upcoming Facades+ AM conference July 21 will highlight notable projects within the state and region; ranging from a diverse spate of recently completed expansions to the University of Oregon campus to the ongoing proliferation of mass timber on

Hickok Cole and Facades+ will spotlight D.C. architectural design and technology

As the nation’s capital, Washington, D.C., is home to a thriving architectural culture, grounded in both historic and contemporary design. The upcoming Facades+ AM conference on February 20 will provide a forum for the city’s design community to dive into the intricacies of some of the region’s most significant architectural projects. The conference is co-chaired by Hickok Cole, a local

EHDD discusses Facades+ and industry trends in the Bay Area

On January 31, The Architect’s Newspaper’s Facades+ conference series is returning to San Francisco. The conference co-chair is EHDD, a Bay Area firm with particular expertise in sustainable design. The morning is split into three panels discussing the resilient design features of 181 Fremont and The Exchange; the complex facade assemblies of Mira Tower and 950 Market Street; and

Bohlin Cywinski Jackson talks Facades+ and the future of Seattle

On December 6, The Architect’s Newspaper is returning to Seattle for the third year in a row in a dialogue of the architectural trends, technologies, and materials reshaping the Seattle metropolitan area. Bohlin Cywinski Jackson, a national firm with a significant presence in Seattle, is co-chairing the conference. Panels for the morning symposium will discuss the complex geometries of the

Fokke Moerel and Michel Rojkind to keynote Facades+ LA

The Architect’s Newspaper’s Facades+ conference, a series on innovative building envelopes, will touch down again in Los Angeles from November 14 to November 15. The first half of the conference is a full-day symposium, which will feature a morning keynote from MVRDV partner Fokke Moerel and an afternoon keynote from Rojkind Arquitectos founder Michel Rojkind. Each keynote

Images of Michael Volk and Olivier Sommerhalder, who will be at this year's Facades+ LA

Gensler’s Michael Volk and Olivier Sommerhalder discuss Facades+ LA and the trends reshaping their city

From November 14 to 15, Facades+ LA will bring regional, national, and international leaders of the AEC industry to Southern California for the fifth year in a row. Hosted by The Architect’s Newspaper and co-chaired by Gensler’s local office, the conference is split between a full-day symposium and a second day of hands-on workshops. Conference keynotes include MVRDV principal Fokke Moerel and Rojkind Arquitectos principal Michel Rojkind. Other participants at

A view of a geometric array of EFTE panels at night, lit from behind with projections.

PARTISANS’ Building Raincoat could help Toronto keep a street culture year-round

Toronto is known for many great things. Its weather isn’t one of them. For the city’s architecture the question is: how can public, urban space be usable and comfortable throughout the year? The architecture collective PARTISANS thinks it might have an answer. Referencing the “maze of awnings…and glass arcades” that defined Toronto streets in the late 19th century,

Architectural terra-cotta is advancing in Buffalo, New York

Now in its fourth consecutive year, the Architectural Ceramic Assemblies Workshop (ACAW) has reached a new level of maturity. The annual conference, hosted in Buffalo, New York, counted a total of nine teams hailing from leading architectural and engineering firms across the country. For attendees, the gathering is an opportunity to part the veil behind the

Edward Peck discusses enclosure technology and Facades+ Chicago

On September 27, The Architect’s Newspaper is returning to the Great Lakes for the sixth time to host Facades+ Chicago. The city is no stranger to architectural innovation, pioneering steel-frame construction, and the curtain walled skyscraper. The conference is, in effect, an appraisal of the most recent projects and research that keep Chicago ahead of the curve in architectural

Exterior of the Kellogg School of Management

Facades+ Toronto will dive into the trends of North America’s fastest growing construction market

On October 11, The Architect’s Newspaper is bringing Facades+ to Toronto for the first time to discuss the architectural trends and technology reshaping the city and region. Toronto’s KPMB, an architectural practice with a global reach, is co-chairing the conference. Panels for the morning symposium will discuss KPMB’s decades-long collaboration with Transsolar Klima Engineering, the proliferation of timber construction across Canada and

Facades+ will spotlight Minneapolis’s experts and innovators

On July 24, The Architect’s Newspaper is bringing Facades+ to Minneapolis for the first time to discuss facade trends within the city and beyond. Panels for the conference will highlight the recently completed Allianz Field stadium, perspectives on curtainwall systems by leading contractors and manufacturers in the region, and the challenges of high-performance design for

Join AN at this year’s AIA Convention in Las Vegas

At this year’s AIA Convention in Las Vegas, The Architect’s Newspaper has organized a booth crawl on June 6 & 7 with our longstanding Facades+ sponsors. Stop by A’19 Booth #9313 (highlighted above) to get your official map and stamp card for a chance to win a $500 gift card.